DL-LYJ-2QE240 experimental casting machine is through the relative movement between the baseband and the scraper, the mixed slurry to form a billet film, billet film together with the baseband into the drying chamber, solvent evaporation, the formation of billet after stripping, in addition to static electricity, wind up the material belt.
It is a compact design, suitable for continuous casting of ceramic slurry into film tape product.
Equipped with advanced doctor blade, can achieve high precision casting of film and thick film.
The thickness of the blank film is controlled by the doctor blade (tool accuracy up to 0.001mm).
The bottom heating of the three stages and the bidirectional drying of the hot air circulation and the thickness accuracy is about (0.1um+2% thickness).
Overview
Suitable for laboratory, small and medium-sized enterprises trial extension
Suitable for production with thickness from 5 to 400um
Multi-stage baseband heating and hot air circulation
Manual operation of the feeding system, suitable for water-based solvents, film tape calibration
Cutting-edge Technology
Siemens PLC programmable electrical control
Multiple independent Drying zones and hot air circulation
High precision: doctor blade accuracy 0.1um doctor blade adjustment accuracy 0.001um
Technical specification | Experimental Tape Casting Machine DL-LYJ-2QE240 |
Baseband width | 250mm |
Casting width | 220mm |
Tool adjustment accuracy | 0.001mm |
Thickness accuracy | ±(1um+2%belt thickness) |
Scraper accuracy | 0.1um |
Baseband width | 250mm |
Casting speed | 0.01-2 (m/min) |
Casting thickness μ(WET) | 5-400μm （static achievable over 1200um) |
Casting film control | 0.02-2m/min continuous winding |
