The Stacker DL-DC-6T is designed for stacking multiple layers of film that need to be laminated together. It uses mechanical positioning with adjustable positioning holes. It also features a servo pressurization mechanism for vacuum evacuation and pre-pressing. The equipment includes upper and lower heating plates to heat the film layers, allowing the PVB adhesive inside the film to reach its softening point. Temperature and pressure are applied uniformly across multiple film layers, ensuring the bonding of multiple green tapes together.
This equipment is suitable for the pressing of multi-layer ceramic capacitors and other thin films, enhancing the physical and electrical properties of the products.
10-inch color touchscreen integrated control panel with a user-friendly interface.
Easy operation, short production cycles.
Small footprint, equipped with adjustable load-bearing casters for flexibility.
Capable of achieving bubble-free lamination of products under high vacuum conditions with a vacuum level of ≤99kPa.
AC servo hydraulic control system for ultra-quiet operation, zero output when not in use, stable performance, and energy efficiency.
High-sensitivity light curtain at the material loading inlet to ensure safety during operation.
Integrated servo hydraulic pressurization cylinder with a compact size and high pressure capacity, reaching up to 42 tons of pressure.
Technical specification | Stacker 6T |
Pressure range | 0-6000KG |
Pressure fluctuation range | ±10kg |
Operating temperature | RT-100℃ |
Temperature control accuracy | ±1℃ |
Pressure holding time | Adjustable in three sections 0-3000s |
Platform size | 220mm*220mm |
Lamination size | 200*200mm |
Production cycle | 3-6 times/s (Depends on product pressure holding time |
